1/40 model of Shenzhou

1/40 model of Shenzhou

In March 2003 the CNES French Space Agency received a delegation from China Satellite Launch & Tracking Control. On this occasion CNES was offered a 1/40 brass model of the shenzhou spacecraft. I was given the opportuny to use this model to take photographs and measurements to produce diagrams. My plan is to use these photographs and diagrams to scratchbuild a 1/48 Shenzhou in order to fit it into my Dragon 1/48 Long March 2E model which I also plan to convert into a Long March 2F for the occasion.

I hope this will be helpfull for all fellow real space modelers.

Vincent Meens - May 2003


P4040001.jpg
112.31 KB

P4090026.jpg
92.50 KB

P4090032.jpg
84.41 KB

P5080001.jpg
95.52 KB

P5080002.jpg
99.99 KB

P5080003.jpg
104.89 KB

P5080004.jpg
100.47 KB

P5080006.jpg
114.47 KB

P5080007.jpg
116.38 KB

P5080008.jpg
114.42 KB

P5080009.jpg
117.68 KB

P5080010.jpg
121.09 KB

P5080011.jpg
123.30 KB

P5080012.jpg
129.10 KB

P5080013.jpg
122.68 KB

P5080015.jpg
206.09 KB

P5080016.jpg
190.45 KB

P5080017.jpg
175.04 KB

P5080018.jpg
110.42 KB

P5080019.jpg
114.60 KB

P5080020.jpg
172.61 KB

P5080021.jpg
115.86 KB

P5080022.jpg
109.92 KB

P5080023.jpg
153.82 KB


Created by IrfanView


Retrieved by Memoweb from http://site.voila.fr/space-models/shenzhou/photo.htm at 22/03/2005