prev

Using the coating pattern I applied panels on the aft wall. The borders are made of thin aluminized adhesive paper of 0.5 mm width. I used directly the printed pattern which had the correct color (Red 163, Green 170, Blue 140), the pattern was printed with a laser printer and I applied a shiny varnish to protect the color and give it the shiny appearance. Note also that the panels were slightly wrinkled as on the real LM.

I intended to use double sided adhesive tape to fix each panel but that didn't work because the adhesive I had was black and could be seen through the panels made out of paper so I applied a few tiny drops of super glue which worked well.

next